Fujifilm DX100/DX400W Quality Dry Photo Paper — 4 in, 5 in, 6 in & 8 in Rolls

The Fujifilm Frontier DX100 uses Fujifilm Quality Dry Photo Paper in 4 in, 5 in, 6 in, and 8 in widths. Each box contains two 213 ft rolls. The paper comes in Luster, Glossy, and Fine Art Matte finishes. Fine Art Matte rolls are 196 ft per roll. The same paper works in the DX100W and DX400W, which share the same paper specification. Part numbers begin with 7160xxx for standard Luster and Glossy rolls, and 1646xxxx for Fine Art Matte rolls.

The Fujifilm Frontier DX400W uses the same Fujifilm Quality Dry Photo Paper as the DX100 and DX100W. Compatible widths are 4 in, 5 in, 6 in, and 8 in in Luster and Glossy finishes on 213 ft rolls, and 6 in and 8 in in Fine Art Matte on 196 ft rolls. Each box contains two rolls. The paper is calibrated to the DX400W’s VIVIDIA ink system and factory ICC profiles.

Luster has a slightly textured surface that reduces glare and fingerprints while maintaining rich, accurate color. It is the most widely used finish for event, portrait, and retail photo lab output where handling after printing is expected. Glossy has a smooth, high-sheen surface that maximizes color saturation and contrast. It is preferred for nature, landscape, and product photography where vibrancy is the priority and handling is controlled. Both Luster and Glossy use the same instant-dry microporous coating and come in the same roll lengths and box quantities.

Fujifilm DX100 Fine Art Matte paper has an ultra-flat, non-reflective surface with no sheen or gloss. It produces extremely high sharpness, deep blacks, and outstanding color range without any light reflection from the print surface. It is used for fine art reproduction, gallery prints, professional portraits, and any output where a non-reflective surface is required by the client or exhibition setting. Fine Art Matte is available in 6 in and 8 in widths at 196 ft per roll, compared to 213 ft for standard Luster and Glossy rolls.

The number of prints per box depends on the print size and paper width. A 6 in x 213 ft roll yields approximately 512 prints at 5 x 5 in, 341 prints at 5 x 7.5 in (standard 5 x 7 with bleed), or 256 prints at 6 x 8 in. Two rolls per box doubles those numbers. A 4 in x 213 ft roll yields approximately 426 standard 4 x 6 in prints per roll, or 852 prints per box. For exact yield at your print sizes, calculate: (roll length in inches) ÷ (print length in inches) = prints per roll.

Yes. The Fujifilm Frontier-S DX100, DX100W, and Frontier DX400W all use the same paper specification. The part numbers, roll dimensions, and finish options are identical across all three printers. A box labeled for the DX100 will load and print correctly in the DX400W and vice versa. Both printers use the VIVIDIA dye-based ink system and share the same paper surface chemistry.

The Fujifilm DX100/DX400W paper part numbers are: 4 in Luster — 7160486; 4 in Glossy — 7160485; 5 in Luster — 7160488; 5 in Glossy — 7160487; 6 in Luster — 7160490; 6 in Glossy — 7160489; 8 in Luster — 7160502; 8 in Glossy — 600022725; 6 in Fine Art Matte — 16460317; 8 in Fine Art Matte — 16460329. All standard rolls are 213 ft. Fine Art Matte rolls are 196 ft. Each box contains two rolls.

The Fujifilm DX100 and DX400W are calibrated at the factory to the ink absorption rate, surface coating chemistry, and color density targets of genuine Fujifilm Quality Dry Photo Paper. Using random third-party paper changes how the VIVIDIA ink absorbs into the coating, which produces color balance shifts, highlight clipping, and shadow detail loss that the printer’s ICC profiles cannot correct without custom profiling. Third-party paper also voids Fujifilm warranty coverage for print quality issues. If you need a cost-effective alternative, Buffalo Imaging’s own u003ca href=u0022https://www.buffalous.com/product/drylab-paper-roll-250-gsm-glossy-luster/u0022u003eDrylab Paper Roll 213 ft — 250 GSMu003c/au003e is engineered as a spec-equivalent replacement for the Fujifilm 7160xxx paper series. It uses the same 213 ft roll length, same instant-dry microporous coating, and same dimensional spec as the genuine Fujifilm rolls, and is confirmed compatible with the DX100, DX100W, and DX400W. It is available in 4 in, 5 in, 6 in, and 8 in widths in Glossy and Luster finishes, starting at $55.18 per 2-roll box — significantly less than the Fujifilm equivalent. Buffalo Imaging guarantees compatibility and sells both options so you can choose based on your budget and output requirements.

Order the width that matches the largest print size you produce most frequently. For 4 x 6 in output, use 4 in wide paper. For 5 x 7 in, use 5 in. For 6 x 4 in, 6 x 8 in, or 6 x 9 in, use 6 in — this is the most common width for retail and event labs. For 8 x 10 in or 8 x 12 in portrait work, use 8 in. Using a wider roll than your print size wastes paper on each side. The printer cuts to your specified print dimensions but cannot print wider than the roll.

Store unopened boxes of Fujifilm DX100 paper in a cool, dry location away from direct light, heat sources, and humidity. Do not store near chemicals, solvents, or strong odors — the microporous coating can absorb airborne contaminants before printing. Once a roll is loaded in the printer, keep the printer’s paper cover closed between jobs to prevent dust accumulation on the paper surface. Partially used rolls stored outside the printer should be wrapped in the original packaging and kept in stable temperature conditions.

Yes. Buffalo Imaging stocks all 10 variations of Fujifilm DX100/DX400W Quality Dry Photo Paper — 4 in, 5 in, 6 in, and 8 in in Luster and Glossy, plus 6 in and 8 in in Fine Art Matte. All variations ship same day on orders placed before 2 PM PST. Orders over $149 qualify for free shipping. Local pickup is available at 2015 Saybrook Ave, Commerce, CA 90040. Buffalo Imaging is an authorized Fujifilm dealer and has supplied photo labs, studios, and retail photo services with Fujifilm equipment and consumables since 1989.