MicroTec Titan 16×20 Pneumatic Slide-Out Heat Press

MicroTec Titan 16×20 Pneumatic Heat Press for High-Volume Production

The MicroTec Titan 16×20 pneumatic slide out heat press (T1620-ASP) is built for shops that need consistent, repeatable results without the physical toll of a manually clamped press. Set your desired pressure on the touchscreen control panel, then activate the press with the touch of a button — the upper platen lowers automatically, and once the timer finishes, the machine opens on its own. Because operation is powered by an air compressor (sold separately), the Titan Pneumatic significantly reduces the physical force normally required to open and close a traditional press, cutting operator fatigue while improving consistency from job to job.

Pneumatic Operation for True Job-to-Job Consistency

By delivering the same time, temperature, and pressure cycle on every press, pneumatic operation removes the operator-to-operator variation that comes with manually clamping a lever press. The result is more uniform transfer results across a full production run, not just the first few pieces of a shift.

8-Point Infrared Alignment for Precision Placement

Up to 8 infrared alignment guides project onto the lower platen, helping operators position transfers accurately before every press cycle. This reduces misaligned prints and speeds up setup time, especially useful for gang-sheet DTF work and multi-location placements where precision placement matters on every piece.

Touchscreen Control with Real-Time Pressure Display

The upgraded control system combines a touchscreen interface, real-time pressure display, and three programmable presets so commonly used jobs can be recalled quickly. A built-in backup fuse helps reduce interruptions and adds peace of mind during production.

21% Thicker Heating Platen for Faster, More Even Heat

The heating element is over 20% thicker than the Vector Series design, delivering stronger heat retention, more even temperature distribution, and stable performance during long production runs. A built-in anti-burn shield adds another layer of operator safety, and the vertical, straight up-and-down pressing motion applies pressure evenly across the full platen — suitable for garments as well as thicker rigid substrates such as wood, ceramic tile, and crystal.

Slide-Out Lower Platen and Up to 12 Interchangeable Platens

The slide-out lower platen design lets operators load, align, and unload away from the heated upper platen, reducing the risk of accidental burns and making the whole loading process more comfortable during long runs. The press is compatible with up to 12 optional lower platen sizes (sold separately), extending it to sleeves, pant legs, bags, labels, youth garments, and hard-to-reach print areas.

What’s in the Box

Choose your accessory bundle above. Both options include the press itself plus additional interchangeable lower plates:

• MicroTec Titan 16×20 Pneumatic Slide-Out Heat Press (1) — press with touchscreen control system and standard lower platen
• One (1) Additional Plate bundle (T1620-ASP): Press plus one single extra 4″ x 4″ plate.
• Five (5) Additional Plates bundle (T1620-ASP-Combo): Press plus five additional plates — 4″ x 4″ (3.94″ x 3.94″), 6″ x 10″ (5.91″ x 9.84″), 8″ x 10″ (7.87″ x 9.84″), 6″ x 20″ (5.91″ x 19.69″), and 11″ x 15″ (11.02″ x 14.96″).

Note: Additional individual lower platens beyond these bundles (up to 12 optional sizes total) are sold separately. An air compressor is required and sold separately — this model operates at 4.2 CFM, unlike Buffalo Imaging’s non-pneumatic Titan presses.

Full Specifications

*MicroTec’s listing states this platen as 15.7″ x 19.6″, a 0.1″ difference from the 15.7″ x 19.7″ platen stated on other Titan 16×20 models — see Pre-Publish Checklist. **Production capacity calculated using DTF film; actual output varies with press time, material, and operator loading speed. At 14.2A / 1700W on 120V, a dedicated circuit is recommended — confirm against local electrical code before installation.

Which Titan or Vector 16×20 Press Fits Your Shop?

Also Available at Buffalo Imaging

Buffalo Imaging is an authorized MicroTec dealer serving professional print shops, commercial decorators, and DTF factories since 1989. If you’d rather skip the air compressor, see the MicroTec Titan 16×20 Auto-Open Hybrid Heat Press. For non-pneumatic two-station throughput, see the MicroTec Titan 16×20 Auto-Open Dual Station Heat Press. For the highest available throughput with pneumatic dual-station operation and laser alignment, see the MicroTec Vector 16×20 Dual Station Pneumatic Heat Press with Laser Alignment. Browse the full heat press collection. Local pickup available at 2015 Saybrook Ave, Commerce, CA 90040.