MicroTec Vector 16×20 Dual Station Pneumatic Heat Press with Laser Alignment and Integrated Stand
$250 OFF00:00:00
Original price was: $2,499.00.$2,249.10Current price is: $2,249.10.
In Stock - Commerce, CA
- Dual-station production: Load and align one item while the second station completes the active pressing cycle.
- Auto and semi-auto pneumatic operation: Air-powered pressing reduces manual effort and helps maintain consistent pressure. External air compressor required and sold separately.
- Laser-assisted alignment: Up to eight infrared positioning guides help operators place transfers accurately and consistently.
- Production capacity: Rated for up to 150 items per hour based on MicroTec testing with DTF film.
- Commercial construction: Laser-cut steel frame, integrated stand with two shelves, anti-burn shield and support for interchangeable lower platens.
MicroTec Vector V1620-APL2 Dual Station Pneumatic Heat Press
The MicroTec Vector V1620-APL2 is a commercial 16×20 dual station pneumatic heat press designed for print shops that need faster production, repeatable transfer placement and less manual pressing effort. Its two sliding lower platen workstations let the operator prepare one item while another is being pressed, helping reduce downtime between cycles.
The machine combines auto and semi-auto pneumatic operation with automatic station switching, laser-assisted positioning and an integrated floor stand. It is suitable for production environments applying DTF transfers and other heat-applied graphics where consistent time, temperature, pressure and placement are essential.
Dual-Station Workflow for Higher Production
The Vector uses two lower platen workstations beneath one moving upper heating assembly. While one item is being pressed, the operator can load and align the next item on the opposite station. At the push of a button, the upper housing and heating element move to the other platen, allowing production to continue with less idle time.
MicroTec rates the V1620-APL2 for production of up to 150 items per hour. This capacity was calculated using DTF film, and actual output will vary according to transfer time, garment preparation, operator workflow and the material being pressed.
Auto and Semi-Auto Pneumatic Operation
The pneumatic system uses compressed air to lower and raise the heating platen. Operators set the required pressure and activate the cycle using the machine controls. When the timer reaches zero, the press opens automatically.
Air-powered operation reduces the physical effort associated with manually closing a heat press and helps deliver more consistent pressure between operators. An external air compressor capable of supplying 4.2 CFM is required and is sold separately.
Laser-Assisted Transfer Placement
Up to eight infrared alignment guides help operators position garments and transfers before pressing. These guides provide repeatable visual reference points that can reduce crooked or off-center graphics during production runs.
Laser-assisted positioning is especially valuable when multiple operators are completing the same job or when a large batch requires consistent placement across every garment.
Commercial Construction and Integrated Stand
The V1620-APL2 is built with a laser-cut steel frame for dependable daily production. Its integrated base includes two shelves that provide storage space for frequently used supplies and help keep the press at a practical working height.
A built-in anti-burn shield provides additional protection around the heated area. The vertical pressing movement applies pressure straight down, which MicroTec identifies as beneficial when working with thicker or rigid materials such as wood, ceramic tiles and crystal.
Preset Controls and Interchangeable Platens
The control box includes three preset memory slots, allowing frequently used settings to be stored for faster job changes. The press also supports multiple interchangeable lower platens for different garment sizes, print locations and specialty applications. Optional platen availability and compatibility should be confirmed before ordering.
What’s in the Box
- MicroTec Vector V1620-APL2-D dual station pneumatic heat press
- Two standard 15.7×19.7-inch lower platen workstations
- Integrated stand and base with two storage shelves
- Integrated laser positioning system
Important: An external air compressor is required and is not included. Optional interchangeable lower platens are not included unless specifically stated in the selected package.
MicroTec Vector V1620-APL2 Specifications
| Product number | V1620-APL2-D |
|---|---|
| Machine line | Vector |
| Operation | Pneumatic, auto and semi-auto |
| Workstations | 2 |
| Platen size | 15.7 × 19.7 in |
| Production capacity | Up to 150 items per hour, calculated using DTF film |
| Temperature range | 32–446°F |
| Timer range | 0–999 seconds |
| Air requirement | 4.2 CFM |
| Power consumption | 1,700W |
| Voltage | 120V |
| Amperage | 14.2A |
| Machine dimensions | 39 × 33 × 31 in |
| Net weight | 421 lb |
| Shipping dimensions | 45 × 39 × 43 in |
| Shipping weight | 638 lb |
| Color | Red and black |
| Heating element warranty | Lifetime manufacturer warranty |
| Technical support | Lifetime support from MicroTec USA |
Professional Heat Press Equipment from Buffalo Imaging
Buffalo Imaging supplies professional printing equipment to apparel decorators, sublimation businesses and commercial print shops. Explore our complete heat press collection or compare the Vector V1620-APL2 with other MicroTec models before choosing the best production configuration for your business.
Questions about air requirements, freight delivery or platen compatibility? Contact Buffalo Imaging at 323-721-5678 for purchasing assistance.
What is the MicroTec Vector V1620-APL2?
The MicroTec Vector V1620-APL2-D is a 16×20 dual station pneumatic heat press with auto and semi-auto operation, an integrated stand and laser-assisted alignment. Its two lower platen workstations let an operator prepare one item while another is being pressed, helping reduce downtime during commercial transfer production.
What is the platen size of the MicroTec Vector V1620-APL2?
The press has two standard lower platen workstations measuring 15.7 × 19.7 inches each, commonly described as 16×20. MicroTec also states that the machine supports multiple interchangeable lower platens for different garment sizes and print locations, but optional platens are not included unless specifically listed in the selected package.
How does the dual station system work on the Vector V1620-APL2?
One item can be loaded and aligned on the open station while the other station completes its pressing cycle. At the push of a button, the upper control housing and heating element move to the opposite platen, allowing the operator to continue production with less waiting between items.
How many items per hour can the Vector V1620-APL2 produce?
MicroTec rates the V1620-APL2 for production of up to 150 items per hour. The manufacturer states that this capacity was calculated using DTF film. Actual output will depend on press time, transfer placement, garment preparation, operator workflow and the material being processed.
Does the MicroTec Vector V1620-APL2 require an air compressor?
Yes. The V1620-APL2 is pneumatically operated and requires an external air compressor capable of supplying 4.2 CFM. The compressor is sold separately and is not included with the standard machine. Confirm that the compressor can maintain the required airflow during continuous production.
Does the Vector V1620-APL2 include laser alignment?
Yes. The press uses up to eight infrared alignment guides to help operators position garments and transfers consistently. The guides provide repeatable visual reference points that can reduce crooked or off-center placement during production runs.
Is the MicroTec Vector V1620-APL2 automatic or semi-automatic?
The machine supports both auto and semi-auto pneumatic operation. Compressed air lowers and raises the heating platen, and the press opens automatically when the timer reaches zero. It also provides push-button station switching so the upper assembly can move between the two lower platen workstations.
Can the Vector V1620-APL2 be used for DTF transfers and rigid materials?
Yes. MicroTec calculates the machine’s maximum production capacity using DTF film. The press also uses a straight vertical pressing motion that MicroTec identifies as suitable for thicker or rigid materials such as wood, ceramic tiles and crystal. Always follow the transfer and substrate manufacturer’s recommended time, temperature and pressure settings.
What are the electrical requirements, dimensions and weight of the V1620-APL2?
The press operates on 120V and is rated at 1,700 watts and 14.2 amps. Its machine dimensions are 39 × 33 × 31 inches and its net weight is 421 pounds. Shipping dimensions are 45 × 39 × 43 inches, and the listed shipping weight is 638 pounds, so freight delivery requirements should be reviewed before ordering.
What is included and what warranty comes with the Vector V1620-APL2?
The standard configuration includes the MicroTec Vector V1620-APL2-D dual station pneumatic heat press, two standard lower platen workstations, the integrated stand with two storage shelves and its laser positioning system. An air compressor and optional interchangeable platens are not included unless specifically stated. MicroTec USA lists a lifetime warranty on the heating element and lifetime technical support.
| Operation Type | Semi-Automatic (Pneumatic) |
|---|---|
| Machine Line | Vector |
| Platen Size | 16" x 20" |
| Press Type | Flat Press |
| Weight | 638 lbs |
| Dimensions | 39 × 33 × 31 in |
Add a review
MicroTec Vector 16x20 Dual Station Pneumatic Heat Press with Laser Alignment and Integrated Stand Your review
* Review is required
Name
* Name is required
Email
* Email is required
Reviews
There are no reviews yet