MicroTec APEX XC-25 Fully Automatic DTF Film Cutter, 25.5 Inch

The MicroTec APEX XC-25 is a fully automatic DTF film cutter that turns finished rolls into individual, ready-to-press transfers without scissors, rotary trimmers or a dedicated cutting operator. It feeds film automatically, reads registration marks to keep cuts aligned, cuts with a pneumatic knife at up to 984 feet per hour, and stacks the finished sheets. Designed for rolls up to 25.5 inches wide, it is the natural partner for 24-inch DTF printers.

Why DTF Shops Choose the MicroTec APEX XC-25

• Fully automatic workflow: auto-feeding, sensor alignment, cutting and stacking in one pass.
• Registration mark detection: the sensor reads marks and corrects film drift, so each transfer is cut where it should be.
• Up to 984 ft per hour: fast enough to support output from up to four DTF printers.
• Pneumatic cutting knife: clean cross-cuts with a blade rated for up to 1,000,000 cycles.
• PLC control panel: set speed, tension and cutting length for each job.
• 110V power: runs on a standard 15A circuit, no three-phase service required.

Stop Cutting DTF Transfers by Hand

Hand-cutting gang sheets is slow, inconsistent and ties up staff who could be pressing or packing orders. As print volume grows, cutting quickly becomes the bottleneck between your printer and your heat press. The XC-25 removes that step: load the printed roll, set your cut length on the PLC panel, and let the machine feed, align and cut while your team works on the next order.

Accurate Cuts with Sensor Alignment

A high-precision sensor detects registration marks on the printed film and corrects film deviation as it feeds. Adjustable tension keeps the film flat and tracking straight, so cuts land in the right place from the first transfer to the last. The pneumatic knife handles PET, PVC and other common DTF film materials.

Which DTF Printers Pair with the MicroTec APEX XC-25?

With a maximum roll width of 25.5 inches, the XC-25 matches 24-inch DTF printers such as the Epson SureColor G6070 DTF printer. MicroTec states the cutter can handle output from up to four DTF printers, depending on print speed, cut length and job mix. Running wider film? Step up to the APEX XC-37, which accepts rolls up to 37.3 inches. Browse all compatible DTG and DTF printers.

Power, Air and Space Requirements

The XC-25 runs on 110V at 1,800W and 15A, and needs a compressed air supply of at least 4.2 CFM. The machine measures 51 x 39.3 x 47.2 inches with a net weight of 649 lb, and it ships by freight at 992 lb. Confirm a dedicated circuit, an air line and freight receiving access before delivery.

Build a Complete DTF Finishing Line

Feed the XC-25 with premium DTF transfer film, pair it with DTF station equipment for powdering and curing, and send cut transfers straight to a high-volume press like the MicroTec APEX X6 rotary heat press.

Warranty and Support

The MicroTec APEX XC-25 includes a MicroTec limited manufacturer warranty and US-based technical support. Coverage terms vary by component, so contact Buffalo Imaging for the current written warranty before ordering. Freight is quoted separately based on your location.

Full Specifications