Canon PFI-110MBK Matte Black Pigment Ink Tank 160mL | 2363C001AA | imagePROGRAF TX Series

The Canon PFI-110MBK is a genuine Canon 160mL pigment matte black ink tank for imagePROGRAF TX series large format printers. Made with Canon LUCIA TD pigment ink, it delivers sharp lines, dependable color and water-resistant output on everything from plain-paper CAD drawings to coated posters. Order part number 2363C001AA for consistent results and printer reliability you can count on.

Why Choose the Genuine Canon PFI-110MBK

• Genuine Canon ink: formulated and tested with TX printheads for reliable, clog-resistant performance.
• LUCIA TD pigment technology: sharp lines, crisp text and output that resists water and smudging.
• Matte Black performance: crisp cad lines and sharp text on plain paper and bond.
• 160mL capacity: best for low to moderate print volume, CAD departments that print mostly line drawings, or keeping a lower-cost backup tank on the shelf.
• Accurate ink tracking: the printer reads the tank chip and reports remaining ink so you can reorder on time.
• Protects your investment: genuine Canon supplies help keep your printer running at full quality.

What Matte Black Ink Does in Your TX Printer

Matte Black is the workhorse ink in most TX-series shops. It prints on plain paper, bond and matte coated media, producing razor-sharp CAD lines, fine hatching and crisp small text that resists smudging. Because CAD and construction drawings are mostly black linework, Matte Black is usually the first tank to run low.

• CAD drawings, architectural plans and construction documents
• Engineering line work and fine text on plain paper and bond
• Black areas on matte coated poster paper

Which Printers Use the Canon PFI-110MBK?

The Canon PFI-110MBK works in the Canon imagePROGRAF TX-3000, TX-3100, TX-3200, TX-4000, TX-4100 and TX-4200, including their MFP Z36 versions. That makes it a shared tank across both the original TX series and current models like the Canon imagePROGRAF TX-3200 36-inch printer and the Canon imagePROGRAF TX-4200 44-inch printer.

PFI-110MBK 160mL or PFI-310MBK 330mL: Which Size Is Right?

Canon offers this matte black ink in more than one tank size, and every TX printer accepts each size. The 160mL Canon PFI-110MBK is best for low to moderate print volume, CAD departments that print mostly line drawings, or keeping a lower-cost backup tank on the shelf. Need a different size? See the Canon PFI-310MBK Matte Black Ink Tank 330mL. You can mix sizes across colors, for example a larger Matte Black tank with smaller color tanks.

Complete Your Canon TX Ink Set

TX printers use five inks: Matte Black, Black, Cyan, Magenta and Yellow. Keep a full set on hand so a low tank never stops a deadline job. Matching 160mL tanks: PFI-110BK Black, PFI-110C Cyan, PFI-110M Magenta, PFI-110Y Yellow.

Pair your ink with media made for aqueous pigment printers, such as Buffalo inkjet coated bond paper for CAD and line drawings, Buffalo premium satin photo paper for posters and renderings, and Buffalo Montana PET blockout banner for durable display graphics.

Installation and Storage Tips

• Keep the tank sealed in its package until you are ready to install it.
• Store ink upright at room temperature, away from direct sunlight and heat.
• Install tanks before the expiration date printed on the package.
• TX printers use a sub-tank system, so you can usually replace an empty tank without stopping the current print.
• Questions about your setup? Call Buffalo Imaging at (323) 721-5678.

What’s in the Box

• One genuine Canon PFI-110MBK Matte Black ink tank, 160mL (part number 2363C001AA)

Full Specifications