MicroTec APEX X6 6-Station 16 x 20 Fully Automatic Rotary Heat Press with Preheat

The MicroTec APEX X6 is a fully automatic, six-station rotary heat press built for shops that need to press hundreds of DTF and heat transfer garments every hour. Three heated plates rotate across six 16 x 20 inch class stations, so your team keeps loading and unloading shirts while the machine presses. Add the built-in preheat stage, pneumatic pressure and digital controls, and you get consistent, repeatable transfers at a pace no single-station press can match.

Why Production Shops Choose the MicroTec APEX X6

• Rotary six-station layout: loading, preheating, pressing and unloading happen at the same time, so operators never wait on the press.
• Rated up to 420 units per hour: enough capacity to move large DTF, team-wear and promotional orders in a single shift.
• Preheat stage: flattens fibers and removes moisture so transfers bond evenly.
• Pneumatic pressure: air-driven force delivers the same pressure on every station, every cycle.
• Digital time and temperature: 0 to 450°F and 0 to 999 seconds to match your transfer supplier recipe.
• Heavy-duty welded frame: a 2,200 lb industrial build designed for multi-shift production.

How the Rotary Workflow Speeds Up DTF Production

Six Stations, Continuous Loading

On a clamshell or swing-away press, the operator stops while the platen is down. On the APEX X6, the table indexes from station to station, so one person dresses the next garment while another station presses and a finished piece comes off the line. Shops that outgrow several manual presses often replace them with one rotary system and free up labor at the same time.

Built-In Preheat for Better Adhesion

The preheat stage flattens garment fibers and drives out moisture before the transfer is applied. That residual heat helps DTF adhesive bond evenly across the print and reduces the risk of lifting edges or uneven finish.

Realistic Output Expectations

MicroTec rates the MicroTec APEX X6 at up to 420 units per hour using DTF film, and cites roughly 320 to 380 transfers per hour as a typical working range. Your actual numbers depend on garment type, transfer dwell time, staffing and how fast your operators load.

Who the MicroTec APEX X6 Is Built For

This press is a fit for contract decorators, DTF transfer shops, uniform and team-wear printers, and promotional product companies running repeat jobs at volume. If you press a few dozen shirts a day, a manual or semi-automatic press from our heat press collection is usually the better value. If you press hundreds or thousands, the APEX X6 is where the labor savings start.

Site Requirements: Power, Air and Floor Space

Plan your space before delivery. The APEX X6 needs 220V three-phase power (8,500W, 23A) and a compressed air supply rated for at least 40 CFM. The machine footprint is 118 x 118 x 78.7 inches, net weight is 2,200 lb, and it ships at 2,904 lb on a freight truck. Confirm floor load capacity, door clearance, forklift or pallet jack access and a qualified electrician hookup ahead of time.

Complete Your DTF Production Line

A rotary press is only as fast as the film feeding it. Pair the APEX X6 with a production printer from our DTG and DTF printers, a powder shaker like the DTF Station Miro 36 inch powder shaker and dryer, and an automatic film cutter so transfers arrive at the press ready to apply. Stock up on DTF transfer film to keep every station busy.

Warranty, Installation and Support

The MicroTec APEX X6 is covered by a two-year limited warranty on the machine, a five-year limited warranty on the heating platen, and a five-year limited warranty on fusion and weld structures, plus lifetime technical support from MicroTec USA. Professional installation and operator training are available as a separate service. Freight is quoted separately based on your location and delivery requirements.

Full Specifications