Qomolangma 63″ Heat Assisted Cold Laminator | Wide Format Roll Laminator FMJ-1600-E-WARM
Original price was: $3,499.00.$3,199.00Current price is: $3,199.00.
In Stock - Commerce, CA
- 63″ Wide Format: Laminates and mounts prints up to 63″ (1600 mm) wide and boards up to 1.4″ thick.
- Heat Assisted Cold Laminating: Top roller warms to 104 °F to activate cold film adhesive and reduce silvering.
- Auto Roll to Roll: Variable speed up to 19.6 ft/min with forward, reverse and hands-free foot pedal mode.
- Built-In Safety: Emergency stop and photocell sensor stop the rollers to protect operators.
- Stand Included: Drop-in 3″ aluminum shafts, removable pressure plate and one-person operation.
The Qomolangma 63 inch laminator is a heat assisted cold laminator built for sign shops, print shops and photo labs that need to laminate and mount wide format prints quickly and cleanly. This Enhanced Version (model FMJ-1600-E-WARM) runs automatic roll to roll, handles prints up to 63″ wide and boards up to 1.4″ thick, and gently warms the top roller to help cold laminating films lay down clear, with fewer bubbles and less silvering.
Why Choose a Heat Assisted Cold Laminator
A standard cold laminator relies on pressure alone. On cooler days or with thick overlaminates, that can leave a hazy, silvered look. The Qomolangma’s heat assist warms the silicone top roller up to 104 °F, just enough to soften pressure-sensitive adhesive so it flows into the print surface. You get the clarity of warm lamination while still using cold films that are safe for heat-sensitive inkjet, solvent, latex and UV prints.
63″ Width and 1.4″ Mounting Capacity
Laminate banners, posters, floor graphics and vehicle graphics up to 63″ (1600 mm) wide, then raise the rollers to mount prints onto foam board, PVC, gator board and other rigid substrates up to 1.4″ thick.
Automatic Roll to Roll Operation
Variable speed up to 19.6 ft/min (6 m/min) with forward and reverse lets one operator run long jobs. Switch between auto mode and the foot pedal when you need both hands to guide prints or boards.
Fast, Simple Setup
A one-side hand crank lifts the top roller to set gap and pressure, and drop-in 3″ aluminum shafts make loading film rolls quick. The removable pressure plate and membrane control panel keep daily use simple.
Safety Built In
An emergency stop and photocell sensor stop the rollers if hands or objects get too close, and the machine is CE certified.
Solid, Quiet Construction
A CNC machined frame keeps the rollers aligned for even pressure edge to edge, while ABS tooling side covers protect the drive system. The stand is included.
Applications
- Over-laminating inkjet, solvent, eco-solvent, latex and UV prints
- Mounting prints onto foam board, PVC and rigid substrates
- Pre-masking cut vinyl graphics with application tape
- Encapsulating posters, maps, menus and indoor signs
- Floor graphics, window graphics and vehicle wrap protection
- Photo labs, copy shops, sign shops and in-house print rooms
Complete Your Wide Format Workflow
- Laminating film: cold laminate film in gloss, matte and specialty finishes
- Print media: adhesive vinyl, solvent, latex and UV media and canvas
- Printers: pair it with our solvent, UV, resin or photo and graphic art printers
- Finishing: contour cut laminated graphics with our cutting plotters
What’s in the Box
- Qomolangma 63″ heat assisted cold laminator
- Stand (assembled on site)
- 3″ aluminum supply shafts
- Foot pedal switch
- Removable pressure plate
Full Specifications
| Brand / Model | Qomolangma FMJ-1600-E-WARM-US (Typhoon E Warm, Enhanced Version) |
| Laminator Type | Heat assisted cold laminator, automatic roll to roll |
| Maximum Laminating Width | 63″ (1600 mm) |
| Maximum Laminating Thickness | 1.4″ (35 mm) |
| Laminating Speed | 0 to 19.6 ft/min (0 to 6 m/min), variable |
| Direction | Forward and reverse |
| Roller Diameter | 4.7″ (120 mm) |
| Top Roller | Silicone rubber, heat assisted |
| Bottom Roller | Natural rubber |
| Maximum Heating Temperature | 104 °F (40 °C) |
| Roller Lift | One-side hand crank |
| Supply Shafts | 3″ interchangeable aluminum shafts, drop-in type |
| Media Core Size | 3″ |
| Control Panel | Membrane control panel |
| Operation Modes | Auto and foot pedal |
| Safety | Emergency stop, photocell sensor, CE certified |
| Motor Power | 90 W |
| Power Supply | AC 110V, 60 Hz, 13A |
| Machine Dimensions | 79″ x 23.6″ x 51″ (2000 x 600 x 1300 mm) |
| Machine Weight | 570 lb (260 kg) |
| Packing Dimensions | 82″ x 27.6″ x 30″ (2100 x 700 x 750 mm) |
| Gross Weight | 646 lb (293 kg) |
| Construction | ABS tooling side covers, CNC machined frame |
| Warranty | 3-year warranty, lifetime free technical support |
Shipping, Warranty and Support
The laminator ships by freight on a pallet at about 646 lb. Local pickup is available in Commerce, California. It is backed by a 3-year warranty with lifetime free technical support. Browse all laminators or call (323) 721-5678 for help choosing films and setup.
What is a heat assisted cold laminator?
It is a cold (pressure-sensitive) laminator with a gently heated top roller. The Qomolangma warms to a maximum of 104 °F, which softens cold film adhesive for better clarity and less silvering without the heat that can damage inkjet prints.
Can the Qomolangma 63 inch laminator do hot lamination?
No. Its maximum temperature is 104 °F, so it is designed for cold and heat-activated pressure-sensitive films, not thermal hot-melt laminating films that need 200 °F or more.
How wide can this laminator laminate?
Up to 63 inches (1600 mm). It also accepts materials up to 1.4 inches (35 mm) thick for mounting prints onto boards.
Can I mount prints onto foam board with it?
Yes. Raise the top roller with the hand crank to set the gap, then mount prints onto foam board, PVC, gator board and other rigid substrates up to 1.4 inches thick.
How fast does it laminate?
Speed is variable from 0 to about 19.6 feet per minute (6 m/min), with forward and reverse, so you can slow down for mounting and speed up for long laminating runs.
What laminating film does it use?
It uses cold pressure-sensitive laminating films on 3 inch cores, including gloss, matte, satin, luster and floor graphic films. Shop our laminate film.
What power does it need?
It runs on 110V, 60 Hz and draws up to 13 amps. A dedicated 110V circuit is recommended.
Does it come with a stand?
Yes. The stand is included and assembles on site, along with 3 inch aluminum shafts, a foot pedal switch and a removable pressure plate.
Can one person run it?
Yes. Auto roll to roll mode and the foot pedal let a single operator feed, laminate and mount prints.
What safety features does it have?
An emergency stop button and a photocell sensor stop the rollers when triggered. The laminator is CE certified.
How big and heavy is the laminator?
The machine measures about 79 x 23.6 x 51 inches and weighs about 570 lb. It ships by freight at about 646 lb in an 82 x 27.6 x 30 inch crate, so plan for a forklift or pallet jack at delivery.
What warranty comes with the Qomolangma laminator?
It includes a 3-year warranty with lifetime free technical support.
| Weight | 646 lbs |
|---|---|
| Dimensions | 82 × 26.7 × 30 in |
Add a review
Qomolangma 63" Heat Assisted Cold Laminator | Wide Format Roll Laminator FMJ-1600-E-WARM Your review
* Review is required
Name
* Name is required
Email
* Email is required
Reviews
There are no reviews yet